Stainless Steel Scrap in Canberra
Looking to turn your unwanted stainless steel into instant cash in Canberra? ScrapX offers competitive per-kilogram rates, certified mobile weighing, and free same-day site pickup. Learn how to accurately identify, sort, and grade your stainless steel scrap to maximize your return today.
How to Tell What You Have and Get It Graded Fairly
Confirming that your material is genuine stainless steel, separating it from mild steel and aluminium, removing high-value components such as brass fittings or motors, and providing photos along with an estimated quantity prior to booking ensures a seamless grading process and optimizes your final payout with ScrapX. If you have stainless steel scrap in Canberra to sell—such as commercial kitchen benches, sinks, storage tanks, or industrial fabrication offcuts—identifying the exact material grade is essential.
What stainless steel scrap in Canberra is worth
ScrapX lists stainless steel at $1.17 to $3.00 per kg for 304 and 316 grades, including sheets, pipes, wire and sinks. Stainless is heavy, so a lot of weight adds up quickly. Using the indicative range:
304 Grade Stainless Steel
Clean sheets, sinks, commercial kitchen benches and fabrication offcuts
$1.17 – $2.20
316 Marine Grade Stainless
High nickel/moly content, pipes, tanks, fittings and marine hardware
$2.00 – $3.00
Stainless Wire & Tube
Clean stainless tubes, high-tensile wire, and industrial offcuts
$1.30 – $2.50
50 kg load approximate payout
Typical household renovation or domestic kitchen scrap load
$58.50 – $150
100 kg to 500 kg loads
Commercial fit-outs, heavy benches, tanks, and structural components
$117 – $1,500
Please note that scrap metal prices fluctuate regularly, so the rates listed here serve as a general guide and are subject to change without notice. For a firm quote based on your material's quality, quantity, and frequency, please contact us via email or call the phone number on our homepage.
Is it really stainless? Easy identification tests
Stainless steel, mild steel and aluminium can all look silver and clean. A magnet and a sense of weight can help you sort what you have before booking with ScrapX:
Treat the magnet as a clue, not proof. Common stainless can pull slightly at bends and welds, and some grades are magnetic. If uncertain, submit clear photographs to ScrapX for expert evaluation.
- A magnet sticks firmly, and the metal is painted or rusty: Mild steel
- A magnet does not stick, and it feels very light for its size: Aluminium
- A magnet does not stick (or weakly), feels heavy, and has not rusted: Common stainless (304 / 316)
- A magnet sticks, but the metal is shiny and rust-free: Magnetic series stainless
Take off what comes off easily
The cleaner the stainless, the less sorting is left at the buyer end, protecting your payout:
Perform these steps where practical. If an attachment can be unbolted easily, removing it adds value. If disassembly requires hours of difficult labor, leave it and let our team know when requesting your quote.
Safety note: stainless often has sharp edges, so wear gloves and eye protection. Leave anything that held refrigerant, chemicals, or pressure to certified specialists.
- Brass taps and fittings: pull these off sinks and equipment; brass scrap has its own high rate!
- Motors and electrical parts: take them off where safe, and sell separately as electric motor scrap.
- Rubber, glass and plastic: remove seals, panels and trim that come away easily.
- Steel brackets and frames: separate these from the stainless where possible.
ScrapX collects sinks, benches, kitchen equipment, sheet offcuts, pipes, tanks, and wire.
Send photos and a rough quantity before you call
A few clear photos and a rough idea of the amount help our team understand your load before arrival:
- One wide shot of the whole pile
- A close-up of pipe ends, fittings, paint or plating
- A close-up of the cable, showing how thick it is and what it is covered in.
- A separate shot of anything attached to the metal, such as motors, brass taps or steel.
How ScrapX works
For scrap metal pickup in Canberra, ScrapX comes to you. The team arrives with certified, industrial-grade mobile scales, weighs your metal on site, and pays you on the spot. You do not have to load, drive or queue at a scrap yard.
- Free same-day pickup: Fyshwick, Belconnen, Gungahlin, Tuggeranong, Woden and the Inner North.
- Regional areas: Queanbeyan and surrounds (free for loads over $100), Yass and Murrumbateman (free for loads over $150), and Goulburn by appointment.
- Opening hours: Monday to Saturday, 8:30 am to 5:30 pm.
From photo to paid pickup
Send photos
Show the whole pile, close-ups of attachments and the likely metal grade.
Get a clear quote
Ask how the rate, grade and pickup threshold will be worked out.
Weigh on site
ScrapX arrives with mobile scales and checks the material in front of you.
Get paid
Once the weight and grade are agreed, payment is made on the spot.
Sell your stainless steel scrap without loading the ute
Inspect your materials, segregate your stainless steel from other metals, remove non-stainless components where practical, and contact ScrapX for transparent on-site weighing and instant payment.
